HR Type Anti-vibration Rubber Hangers
Description
Rubber hanger vibration isolators are very effective for the support of suspended ceilings where acoustical isolation is required. HR type is a spring hanger that consists of a combination of anti-vibration rubber with metal frame for better vibration isolation of low and high frequency.
These low frequency hanger mounts are great for suspension of rotating equipment and piping work. Typical uses include suspending mechanical equipment such as in-line fans, cabinet fans, and piping and ductwork in close proximity to mechanical equipment.
HR type Rubber Hangers are isolation hangers that offer cost-effective solutions for the isolation of suspended equipment. These hangers are designed to solve high frequency attenuation problems in protected space or radiating from the space to surrounding locations.
The equipment and piping are supported from vibration hangers consisting of a steel box with an internal elastomeric element. Three different sizes provide load capacity ranges from 25 to 300kg, offering accurate hanger selection even for units with unequal weight distribution.
Features
● Made by C.R. rubber, long service life.
● The outer frame is baking varnish for anti-rust and salty spray treatment.
● Suitable for isolating mechanical vibration and noise
● Steel frame with painted finish or galvanized metal for protection.
● Hanger capacities can be mixed to accommodate equipment with uneven weight distribution.
● The hanging bolt is not included.
Applications
● Suspended piping
● Suspended electrical services
● Suspended equipment
● Suspended ductwork
Product Parameter
Type |
Rated Capacity (Kg) |
Hardness (shore) |
Compression height (mm) |
Dimensions (mm) |
|||||
A |
B |
L |
H |
W |
Bolt |
||||
HR-100 |
25-100 |
45 |
3.5-7 |
60 |
30 |
85 |
95 |
40 |
Φ14 |
HR-200 |
160-200 |
60 |
3.5-7 |
60 |
30 |
85 |
95 |
40 |
Φ14 |
HR-300 |
250-310 |
70 |
3.5-7 |
60 |
30 |
85 |
95 |
40 |
Φ14 |