Rubber Vibration Isolators
-
BKHQ Type Anti-vibration Rubber Mounts
→ Elastic element: Rubber
→ Metal part: Blue zinc-plated steel
→ Application: gasoline engine, motor, generator, compressor, engine, electric pump, air conditioning. -
BKDR Type Anti-vibration Rubber Mounts
→ The simple structure of the BKDR rubber mount make it easy to install.
→ With the nature rubber, it has a high deflection while the frequency of the vibration is under 15Hz (900RPM).
→ The load range from 200kg to 1200kg.
→ It’s widely use in heating, air-conditioning, pumps, fans, compressor, control cabinet. -
BKP Type Anti-vibration Rubber Mounts
BKP specifically designed can give large deflection at low loads, whilst being compact in weight and easy to install. Its ideal for applications involving isolation of low frequency vibrations in all planes. It provides passive vibration isolation on electronic instruments, measuring equipment and test cells. It is low frequency enemies.
-
BKM Type Anti-vibration Rubber Mounts
The original design of this mount is for ship engine with small dimensions and simple installation. It’s good for shock situation. The top metal cap can protect rubber against oil. There are different types and hardness of mounts, the load range is from 32kg to 3000kg, and natural frequency lower than 8Hz. The vibration isolation is very high.
-
BKH Type Anti-vibration Rubber Mounts
The rubber mount can get good vibration isolation in vertical and radial direction, especially for generator and engine with excited frequency of 25Hz (1500rpm). The rubber is vulcanized with metal part, can attenuate the vibration efficiently. Fail safe designing can protect the equipment safety. The load range is wide and deflection is small, the excited frequency should be 1500rpm to 3500rpm.
-
BKVE Type Anti-vibration Rubber Mounts
The rubber mount supports all kinds of mechanical objects and can effectively absorb the vertical force to prevent impact and overload.
-
BKDE Type Anti-vibration Rubber Mounts
Stud Sandwich Mount Vibration Isolators provide simple and efficient solution for dampening unwanted shocks and saving life of the equipment.
-
BKDD Type Anti-vibration Rubber Mounts
→ Elastic element: rubber
→ Metal part: White galvanized steel UN-IS2081
→ Application: Centrifugal machine, pump, electric motor, compressor with working speed over 1200rpm. -
BKVD Type Anti-vibration Rubber Mounts
→ Elastic element: rubber
→ Metal part: White galvanized steel UN-IS2081
→ Application: Centrifugal machine, pump, electric motor, compressor with working speed over 1200rpm. -
BKVV Type Anti-vibration Rubber Mounts
The rubber mount is made by high strength of natural rubber, the metal part with special surface treatment, the bonding strength is up to 40kg/C. The fatigue life is very good, suitable for all kinds of small generator, pump, motor and centrifugal machine. The installation is simple and the specification is wide. Outer diameter with 8mm to 150 mm can meet all kinds of isolated equipment.
