How to choose the right vibration isolators for the punch? I believe that many people are also relatively interested in this question, so next we tell you about the answer to this question:
Firstly, for the selection of an effective vibration isolators requirements are very high, because the tonnage of the punch is generally 25 ton, the impact is relatively large, so in the selection of vibration isolators to choose can bear such impulse, and the shock effect to reach more than 80% is more suitable.
Secondly, DS type damper spring isolators with damper is preferred. Because the working speed of the punch is very fast, it is dozens of times or even more than 100 times of the ordinary equipment. The vibration caused by the punch at that speed is bound to cause resonance. As is known to all, the harm of long-term resonance is very big. It will not only cause damage to the workshop, but also the severe jitter will have a serious impact on the life of your equipment itself and the mold.
Thirdly, the hydraulic pump should choose its own natural frequency is relatively low vibration isolators at 3Hz, because the speed of the flywheel is very fast when the high-speed operation. It can usually reach more than 500 RPM or even faster.
Post time: Mar-24-2023